6 steps to open wine button (applies to li-button type e)1. the cutting knife wrapped in the neck of bottle.Clean the bottle neck before opening button.You should cut the corks a neat waybelow the rim with tonguethe open Cork. Make sure that the tear wastrimming out the button.2. plug the whirlpool pointed to the middle node li-e. If the open Cork goes on a angle, it will break the button.Rotate the bottle button Open button into the li-evertically in the middle of corks.3. when the cyclones are almost flooded the already sharp stops.Folding the spine creating power levers on the neck of bottle.4. slowly lever Cork up vertically. The force of the appropriate lever will push the split button and minimize the possibility of breaking the knot.5. stop when the button is still in part (about half a centimeter) in the neck. If pulled sharply forward, will create an explosion of discomfort. In addition, there may be small fragments fell into the inside of the bottle.6. use your hands to gently pulled the Cork out. Use a towel (no type of cotton fiber) wipe gently the bottles of wine. Never throw away corks away. You can rotate it counterclockwise to close the bottle again if emptied.
đang được dịch, vui lòng đợi..