MAX3421E interface padsare used to

MAX3421E interface padsare used to make shield modifications easier. Pads for SS and INT signals are routed to Arduino pins 10 and 9 via solder jumpers. In case pin is taken by other shield an re-routing is necessary, a trace is cut and corresponding pad is connected with another suitable Arduino I/O ping with a wire. To undo the operation, a wire is removed and jumper is closed. See interface modifications section for more information.GPX pin is not used and is available on a separate pad to facilitate further expansion. It can be used as a second interrupt pin of MAX3421E.

Kết quả (Anh) 1:

MAX3421E interface padsare used to make the shield modifications easier. Pads for SS and INT signals are routed to the Arduino pins 10 and 9 via solder jumpers. In case the battery is taken by other shield an re-routing is necessary, a trace is cut and corresponding pad is connected with another suitable Arduino I/O ping with a wire. To undo the operation, a wire is removed and the jumper is closed. See interface modifications section for more information. GPX pin is not used and is available on a separate pad to facilitate further expansion. It can be used as a second interrupt pin of MAX3421E.

Kết quả (Anh) 2:

MAX3421E interface used to make shield padsare Easier modifications. Pads for SS and INT signals are routed to Arduino via solder pins 10 and 9 Jumpers. In case the battery is taken by other safety shield re-routing is cần, a trace pad is cut and is connected with another tương ứng Suitable Arduino I / O ping with a wire. To undo the operation, a wire is unaligned and jumper is closed. See section for more information.GPX modifications interface is not used batteries and is available on a pad to facilitate Further expansion chia. It can be used as a second MAX3421E interrupt pin of.