nằm ở trang 13

nằm ở trang 13

Kết quả (Anh) 1:

located on page 13

Kết quả (Anh) 2:

Some models have a fan controller module mounted on the radiator fan
shroud that will need to be relocated for catch can fitment.

The controller does not need to be unplugged. There are 3 mounting
points. First, push the lower tab downwards with your thumb. From the
bottom, rotate the controller outwards to release.

Pull and release the 2 large gauge wires from the 2 lower hold downs. This
will free up the required wire slack.

For clearance purposes, cut the inward upper tab. Not much needs to be
removed, as shown.

Reposition the controller to the LH side of the fan shroud. Using zip ties,
secure the controller to the fan shroud brace, as shown.


Find the included Radium mounting bracket and the two M6 button head
bolts in the kit.

INSTALL THE BRACKET UNDER THE OEM TAB, shown in the center.

Reuse the 10mm hex head screw from earlier. Hand tighten all 3 bolts first,
then tighten.

Kết quả (Anh) 3:

在13页上。