The next step is to put restraint on by spending at least 1/2 inch bit to cut straight lines. After installation is complete, the mold guide yourself by measuring the distance from the cutting edge to the edge of the router base. This is what you need to do to make up the groove (groove) to be able to put the router base on the first lip easily. After finishing the above operations was time you perform your job cuts at the heart of it. Moreover you can also have a base plate for installation on the router table during molding this result even more choice for your size. When the router turns around the inside of the jig it will help you remove the stock is below the plate. So which is extremely important for you to check back several times by the kind of measurement tool.
đang được dịch, vui lòng đợi..