photo 1 -
1. some flavor of 5.56x45 loaded with a steel projectile in a copper half-jacket to protect the bore
2. Xm216 spiw 5.56mm flechette
3. 7.62/.220 salvo squeezebore photo 2
-
1. 9x19mm - looks much like a british mkiiz 9mm
2. 9x19mm - solid brass hollow point - unsure of maker
3. 9x19mm - either a tracer or possibly an explosive projectile. Furniture filler is not sure what photo 3
-
1.9x19mm cobra "high safety ammunition" - steel darts inside a polymer Sabot
2. Israeli riot control 9x19mm - steel balls embedded in amber resin photo 4
-
1. Short-range training plastic 7.62x51mm tracer
2. this one is curious - it looks like a 7.62x51mm but the interior looks like a 'sabotage' as it có vẻ cartridge to be loaded with a blasting cap and a small amount of explosive.edit - upon Further consideration, i believe it may be a MAUSER 7.92mm 7.62mm NATO rather than a case based on the dimensions and bullet construction.
3. 6.5x55mm bullet wood blank (guessing at the cartridge on Furniture one, it looks right!)
Photo 5 -
1. .450 Adams - the case có vẻ too short and the bullet is too short, the cavity too shallow and it does not have enough to be a grease grooves.455 MKII.
2. Speer .38 target photo
6 -
1. Glaser
2 .38 special. .224 Boz
edit - this thread took off while i had this reply open. it took me a few hours to finally finish typing this!
đang được dịch, vui lòng đợi..