MOULD PREPARATION INSTRUCTIONS- Check-form surfaces: The surface must be clean-form, flat, not convex and concave. - Cleaning mold and smooth the surface viscous nonstick pan. - Fitting the mold: use a fixed navigation key ministries parts of mold - For reinforced frame into the mold: Frame must be prescribed reinforced 5 mm above the ground, use a tape measure to check the placement of reinforcement as designed. - Insert the intestine into the mold: Number of bowel and spacing the gut by design depending on the type of drain. Technical staff can use to check the probability measure the distance between the intestine. - Installation of the U-shaped course of position was designed and conducted putting mold in forming machine APPROVAL
đang được dịch, vui lòng đợi..