The Mainboard power connector:-Adjust 20-pin ATX power adaptor to the mainboard.-Press down on the adaptor until the clips defined in that place.-Adjust the 4-pin AUX adaptor to the mainboard.-Press down on the adaptor until the clips defined in that place.+ Power Molex connections:-SATA adaptor link on HDD.-Molex adaptor link into the optical drive.-Link 4-pin Berg adaptor on the type.-Match three-pin fan adaptor on the mainboard.-Link cables from the case on the mainboard+ Data cable Bridge:-PATA cable connection on the mainboard for socket.-Connect the adaptor cable into the PATA in under the optical drive.-Connect a SATA mainboard with socket head.Connection cables for SATA HDD.-Connect the last motherboard cables with the mainboard's socket.-Adaptor in the bottom of the cables connected to the floppy drive.+ External cable assembly into the computer:-Connect the monitor cable to the monitor port on the CPU.-Protect the cable screws in the end.-Connect the keyboard to the keyboard port CPU-Connect the mouse with mouse CPU port.-USB connection with the CPU by the USB port.-Connect the network cable to the network port by the CPU.-Bridge the wireless antennas to the antenna adaptor-Connect the power cable to the power outlet
đang được dịch, vui lòng đợi..